What should be paid attention to in the most popul

2022-07-24
  • Detail

Editor's note: in any sense, founder of Peking University can be well deserved to be called the pride of China's IT industry: while China's software industry is losing ground to the attacks of overseas competitors, founder's typesetting system is unique. According to relevant materials, founder's typesetting software has occupied 80% of China's newspaper market and 90% of the book publishing market, 90% of the overseas Chinese newspaper market, and took the lead in using electro-hydraulic proportional control technology in material experiments to enter the field of Japanese typesetting

even so, founder is not intoxicated with himself, let alone stopped. After entering the 1990s, the competition in the typesetting industry tends to be diversified: the products of apple, QuarkXPress, adobepagemaker and other domestic companies are pouring in. In the face of this situation, founder has constantly made timely adjustments to adapt to market changes, such as abandoning the page description language PDL standard developed by founder, turning to the research on postscirptlevel I created by Adobe, and quickly completed the development of the postscript interpreter and subsequent technology innovation

these measures have enabled founder to remain in a dominant position in technology and products, but these adjustments are only benign, not revolutionary. Now let's summarize founder typesetting 3 There are several places that are easy to cause problems in the abnormal process of hammer return, which are only for reference:

1. Partition notes and paragraph beginning notes

(1) partition notes are mainly used to divide a certain area of the layout into an independent area, and typesetting is carried out in this area

format: FQ (partition size) [(starting point) [(layout)][, dy][(border description)] [(shading description)][z] [!]] Partition content > FQ>

where < partition size > gives the size of the divided area, which is expressed by parameters as follows:

< partition size > blank line parameter > 〔 spacing 〕

(2) the section header annotation is mainly used for the equipment section header and arranging the first big words of the section. When the section header content is not a single word, We usually use the following annotation format:

[DS (size) [border description] [[shading description], [first paragraph content], [DS)]

here, the size parameters of the first paragraph annotation are expressed as follows:

[size], [blank line parameter] Spacing>

(3) error prone places:

when the partition area is located in the upper left corner of the page and the partition content is required to be arranged vertically, do you use partition annotation or paragraph annotation

the sample file can be written in the following two ways:

① [DS (6.4h023)] HT5, 3K], [JZ () fresh ↓ flowers ↓ offer ↓ to you ↓ [JZ], [DS] flowers to you. Who should the green leaves be left to? I...

② [FQ (6.4 (, 1) -h023z!) [JZ () [HT5], 3K] flowers for you [JZ FQ] and [HT] flowers for you, who should the green leaves be left to? I

which one is correct? By comparing the typesetting results of the two methods, it is found that the typesetting results of the first method are exactly the same as those of the given sample, while the typesetting results of the second method are the same

for the edition machine with the first paragraph annotation row, there is a text line space between the vertical title words, while there is no gap between the title words of the edition of the annotation row with the experimental machine that is used to carry out mechanical stress experiments such as static load, tension, compression, zigzag, shear, peeling, etc. on the materials

2, HT, HTK and HT2 annotations

many people make mistakes in actual use

(1) [HT] indicates to restore the font and font size of the layout center. If the font and font size are in the If the layout center in the pro file is defined as Han Ti No. 3 Book song, then [HT] means to restore to Han Ti No. 3 Book song; If If the layout center in pro file is defined as Han typeface 5 and Song typeface 5, then HT means to restore to Han typeface 5 and Song typeface, which is very important in typesetting

for example, you are In the pro file, the central font is defined as No. 5 font, but in actual operation, the following font annotation is made for a few words in the sample: 【 ht3st 】. At this time, do not forget to add 【 HT 】 annotation after the annotated words to restore the central font number, otherwise the following words will become No. 3 font. It doesn't matter if you don't need to add other annotations to the sample. Maybe you will find the problem as soon as the sample is arranged. The trouble is that if you make a partition annotation or a large caption immediately after these words to improve the experimental results or table annotations, even though the partition size you set is < 3,1 >, you will soon find that the actual partition size is much larger than you think. Why? It's because you forgot to restore the font annotation in the center of the page, and still do not partition or make a paragraph header according to the size of No. 3 comfortable font

(2) [HTK] indicates that the font size of the previous annotation is restored, but the font after the annotation is changed to regular script. If the adhesive annotation is ht3xk, HTK indicates that the font size is three and the font is regular script

(3) HT2 means to change the font size after the current annotation, but the font after the annotation remains the same. If the previous annotation is ht4xk, HT2 means that the font size is 2 and the font is still in regular script

Copyright © 2011 JIN SHI